Title
Description
Notes
Date
Power Up-electrical/hydraulic/pneumatic Job Responsibilities: • Must be able to read electrical diagrams • Must have knowledge in electrical circuits • Must be knowledgeable in troubleshooting product • Electrical, Hydraulic and Pneumatic installation o Use of basic hand tools • Will use a volt meter to diagnosis problems • Limited computer work – look up parts • Off-site work if needed • Use drill press and roll saw to correct dimensions of material used in the assembly of product • Final assembly o Use of basic hand tools and air tools • Test completed unit to ensure product is working according to specifications • Complete quality checklist and turn into supervisor *This position is not limited to the responsibilities listed above* Tool/Machine/Technology Requirements: • Fork truck operation – sit down, walk behind and stand up • Personal tools will need to be provided Job Summary: Employee must pull required parts from inventory. Assemble pulled parts and install on to unit. Test unit to ensure finished product is working according to specifications. Once completed, employee will then sign off and send to packaging for shipping. Job Requirements: • Good computer and math skills • Must be able to lift up to 50 lbs on a regular basis • Must be able to bend, twist, squat repetitively throughout work day • Must be able to speak, write, read and understand English • See and hear within reasonably acceptable limits, (this includes the ability to see at a distance and peripherally) • Use time management skills and prioritization to accomplish the day’s tasks in the hours provided • Must be self-motivated as much of the day is unsupervised • This is a 40 hour per week position and may require mandatory overtime hours • Must be 18 years of age or older PPE Requirements: • Steel Toed Shoes • Safety Glasses 6/15/2018
Custodian/Housekeeping/Janitor The janitor keeps the plant, offices, break areas and restrooms in a clean and orderly condition. Helps to maintain the building, performing minor and routine painting, plumbing and other related maintenance activities. Uses time management skills and prioritization to accomplish the day’s tasks within the hours provided. Job Responsibilities: • Clean building floors by sweeping, mopping, or scrubbing. • Clean break area floors and tables. • Gather and empty trash. • Service, clean and supply restrooms. • Make adjustments and minor repairs. • Use and mix water and detergents or acids in containers to prepare cleaning solutions, according to specifications. • Follow procedures for the use of chemical cleaners and power equipment. • Notify managers concerning the need for major repairs and additions to building operating systems. • Maintain cleaning supply rooms, monitor supplies and stock supplies. • Requisition supplies and equipment needed for cleaning and maintenance duties. *This position is not limited to the responsibilities listed above* Tool/Machine/Technology Requirements: • Use various hand tools as needed for various jobs. Job Requirements: • Must be able to lift up to 50 lbs on a regular basis. • Must be able to bend, twist, squat repetitively throughout work day. • Must be able to speak, write, read and understand English. • See and hear within reasonably acceptable limits, (this includes the ability to see at a distance and peripherally) • Have a valid driver’s license. • Drive vehicles required to perform or travel to cleaning work, including vans, and industrial trucks. • Must be self motivated as much of the day is unsupervised • This is a 40 hour per week position and may require mandatory overtime hours • Must be 18 years of age or older 6/15/2018
Welder-NOW HIRING-OPEN POSITIONS PRODUCTION HOURS 7-3:30 Responsible for fabrication of product by welding together the correct pieces to produce finished product. Job Responsibilities: • Must be knowledgeable of all parts used for the assembly of products • Will need to verify parts to print • Must be able to read blueprints • Build units by welding to quality specifications o Making sure of squaring, levelness and plumb • Must remove BB’s and sharp edges from finished product using hand tools o Sander, putty knifes, chisel and hammer • Inspect finish products against engineering specifications • Will need to use hand tools throughout production • Accurate use of a tape measure • Must notify supervisor/lead person for final inspection • Will need to know how to use magnetic hoist to move product • Fork truck operation These are not the only duties performed by the Welder. Job Requirements: • Must have basic math skills • Must be able to lift up to 50 lbs on a regular basis. • Must be able to bend, twist, squat repetitively throughout work day. • Must be able to speak, write, read and understand English • See and hear within reasonably acceptable limits, (this includes the ability to see at a distance and peripherally) • Use time management skills and prioritization to accomplish the day’s tasks Within the hours provided • Must be self motivated as much of the day is unsupervised • This is a 40 hour per week position and may require mandatory overtime hours. • Must be 18 years of age or older. 06/15/18
Maintenance-NOW HIRING-OPEN POSITIONS Job Summary: Responsible for inspecting, servicing, troubleshooting and repairing all plant equipment assigned to him/her. Employee must follow a systematic process for accomplishing preventive, scheduled and emergency equipment maintenance. Employee must be knowledgeable of industrial electricity (all phases and voltages), mechanical, electrical, pneumatic and hydraulic operations, troubleshooting techniques, blueprint, schematic analysis and proper use of tools and diagnostic equipment. An individual must be able to perform each essential duty satisfactorily and needs to be willing to learn new tasks as needed. PRODUCTION HOURS: 7 AM-3:30 PM Job Responsibilities: • Forklift repair / maintenance / operation • PLC • Repairing and maintenance of company vehicles • Building Maintenance/General Carpentry • Electrical / Plumbing Installation / Repair • Air compressor repair / maintenance • Dryer repair / maintenance • Machine repair / maintenance • Hydraulic equipment repair / maintenance • Crane / Hoist maintenance and repair • Welder equipment maintenance and repair • Blue print reading • Reading schematics • Troubleshooting is a daily process • Inventory control (counts, part numbers, cost associations, material receipts) • Prioritization and Time Management Skills *This position is not limited to the responsibilities listed above* Tool/Machine/Technology Requirements: • Must be able to use all hand tools, including pneumatic and hydraulic Job Requirements: • Computer proficiency (Outlook and scheduling software) • Must be able to lift up to 100 and carry 50 lbs on a regular basis. • Must be able to bend, twist, squat repetitively throughout work day • Must be able to speak, write, read and understand English • See and hear within reasonably acceptable limits, (this includes the ability to see at a distance and peripherally) • Use time management skills and prioritization to accomplish the day’s tasks in the hours provided • Must be self-motivated as much of the day is unsupervised • This is a 40 hour per week position and may require mandatory overtime hours • Must be 18 years of age or older Required PPE: • Steel toed shoes • Safety Glasses 06/14/18
Paint and Paint Prep-NOW HIRING-OPEN POSITIONS Employee is responsible for the painting of product to produce a quality end product. Other duties include cleaning and maintaining of paint booth and equipment. PRODUCTION HOURS 7 AM-3:30 PM Job Responsibilities: • Set up, clean and maintain paint equipment with emphasis on paint guns assuring proper performance. • Pull correct product and move into paint booth. • Inspect product prior to painting to ensure all sharp edges, BBs are removed and welds are acceptable. o Use of hand tools for removal of BBs and sharp edges. • Paint with air assisted airless paint system assuring 100% coverage with no runs. • Clean and maintain paint booth and spray equipment using solvent and brush. • Assist with prep work as needed. • Will maintain a daily paint log. *This position is not limited to the responsibilities listed above* Tool/Machine/Technology Requirements: • Fork truck operation • May have to use hoist to assist in painting of product. Job Requirements: • Basic computer and math skills • Must be able to lift up to 50 lbs on a regular basis • Must be able to bend, twist, squat repetitively throughout work day • Must be able to speak, write, read and understand English • See and hear within reasonably acceptable limits, (this includes the ability to see at a distance and peripherally) • Use time management skills and prioritization to accomplish the day’s tasks in the hours provided • Must be self-motivated as much of the day is unsupervised • This is a 40 hour per week position and may require mandatory overtime hours • Must be 18 years of age or older 06/03/18
Aluminum Welder-accepting applications, scheduling interviews and weld tests • Welding of steel or aluminum - pipe/tubing/aluminum tread plate • Use of hand tools – Levels, squares, wrenches, wire cutters • Must be able to trouble shoot issues with welding machines • Must be able to switch wires and gas tanks for welding machines • Must be able to change liners in welding guns • Must remove BB’s and sharp edges from finished product using hand tools o Sander, die grinder or cut off wheel • Use tape measure accurately • Receive and be able to understand product print to allow fabrication of product • Break down damaged product using cutting torches or cutting wheels • Use hoist, slings and chains • Occasionally take inventory of material *This position is not limited to the responsibilities listed above* Tool/Machine/Technology Requirements: • Fork truck operation – when material handler is not available PRODUCTION HOURS: 7 AM-3:30 PM Job Requirements: • Basic computer and math skills • Must be able to lift up to 50 lbs on a regular basis • Must be able to bend, twist, squat repetitively throughout work day • Must be able to speak, write, read and understand English • See and hear within reasonably acceptable limits, (this includes the ability to see at a distance and peripherally) • Use time management skills and prioritization to accomplish the day’s tasks in the hours provided • Must be self-motivated as much of the day is unsupervised • This is a 40 hour per week position and may require mandatory overtime hours • Must be 18 years of age or older 06/01/18
Manufacturing Supervisor-accepting resumes Supervisors are the leaders of their department. They are expected to maintain a professional, team oriented, safe and efficient work place. Supervisors work with the Human Resources department to make staffing recommendations, coaching and perform disciplinary action as required. They will work closely with the Plant Manager to produce quality products and complete orders on time. Supervisors are responsible for their department's scheduling, reporting and forecasting. Qualifications: Proven leadership skills to direct employees toward production goals. Strong problem solving/resolution skills. Excellent written, verbal and interpersonal communication skills to interact with all levels of the organization. Strong computer skills with experience in Microsoft Office (especially Excel) and ability to learn and navigate Vestil-specific applications. Ability to prioritize and manage multiple competing requests while maintaining a culture of accountability and efficiency. High School degree and 3-5 years of supervisory experience is required. Must be able to lift 50 lbs on a regular basis and required to wear appropriate PPE. 06/01/18
Inventory Assembly-OPEN POSITION Responsible for receiving parts, verifying counts, stocking parts and accuracy of products on a daily basis. Pulling parts for internal departments and customer shipments. Assembly and wiring various components. Basic knowledge of electrical and hydraulic supplies required. Job Responsibilities: • Excellent knowledge of products and layout of inventory room • Counting parts for inventory • Will prepare parts orders for internal departments and customer shipment o Pull correct parts from racks and package • Must be able to manage inventory o Keeping track and ordering of parts for Inventory Room and other departments =607; Entering info into computer database • Completion of cycle counting form and turn in to Supervisor • Stock departments throughout the plant • Wiring electrical control assemblies using basic hand and air tools • Assemble various components *This position is not limited to the responsibilities listed above* Tool/Machine/Technology Requirements: • Fork Lift Operation – stand up and sit down • Basic knowledge of electrical and hydraulic supplies Job Requirements: • Must have good math skills • Must be able to lift up to 20 lbs on a regular basis and up to 60 lbs occasionally • Must be able to bend, twist, squat repetitively throughout work day • Must be able to speak, write, read and understand English • See and hear within reasonably acceptable limits, (this includes the ability to see at a distance and peripherally) • Use time management skills and prioritization to accomplish the day’s tasks in the hours provided • Must be self-motivated as much of the day is unsupervised • This is a 40 hour per week position and may require mandatory overtime hours • Must be 18 years of age or older 06/01/18
Parts Sales Specialist-OPEN POSITION Assisting customers in determining what Vestil products they have and what replacement parts they need. Work through product issues with customers in a friendly and positive manner and able to communicate this over the phone and through email. FULL TIME HOURS 8-4:30 Job Responsibilities: • Work with product drawings to correctly identify parts on products • Correctly type orders with part number and prices and email to order entry • Understand shipping methods to help customers • Be able to rapid toggle between tasks as the phones get busy • Respond to customer needs in a timely, pleasant, and professional manner • Resolve customer complaints by investigating problems and developing solutions • Develop relationships with repeat customers • Assist other team sales members with parts related questions and problems • Identify advantages in selling kits and add on parts to improve customer repairs and limit repeat problems • Work with floor technicians to better understand what customer is needing • Be able to work with data bases, streamlining tech support calls • Willing to adapt to various challenges throughout the day *This position is not limited to the responsibilities listed above* Tool/Machine/Technology Requirements: • Must be able manage emails through Outlook • Basic knowledge of Navision after some short training • Typing skills are a plus Job Requirements: • Good computer and math skills • Must be able to lift up to 50 lbs on a regular basis • Must be able to bend, twist, squat repetitively throughout work day • Must be able to speak, write, read and understand English • See and hear within reasonably acceptable limits, (this includes the ability to see at a distance and peripherally) • Use time management skills and prioritization to accomplish the day’s tasks in the hours provided • Must be self-motivated as much of the day is unsupervised • This is a 40 hour per week position and may require mandatory overtime hours • Must be 18 years of age or older 06/01/18
Engineer-Open Position OFFICE HOURS-weekdays (hourly) • Designing new products, redesigning products for improvements • Drafting and finalizing drawings, marketing materials (tech drawing and owner’s manuals) • Customer support, customer specific quotes & designs/drawing and facilitating all engineering aspects of customer specific orders • ECR’s (Engineering Change Requests) / product improvement, research & development and possible product management from concept to final product release • Candidates would need to be skilled in basic Windows programs including Excel, Word, Outlook & need to be able to work in a 3-D modeling software, preferably Solidworks • 4 year degree in Engineering with 2+ years of experience Please attach resume to online job application. 06/01/18